Traktor Kontrol S8 User Manual Download Page 207

Page: 207 / 264

• Each channel has a dedicated Fader to smoothly fade into and out of the mix going out

the Main out.

• The Crossfader fades between left and right sides. Each channel can be assigned to one

of the sides via dedicated switches on S8's front panel.

• The Crossfader feeds into the Main section which routes the signal to

MAIN

BOOTH

and

CUE

outputs.

• Also in the Mixer's Main section, you can set the global TEMPO and turn on/off Snap and

Quantize

4.4.1

Mixer Channel

All mixer channels are laid out identically. Let's have a look at one of them.

Hardware Reference

The Mixer

TRAKTOR KONTROL S8 - Manual - 207

Summary of Contents for Kontrol S8









































































































































































































































































Search results

Summary of Contents for Kontrol S8

Reviews:

Related manuals for Kontrol S8

Brands by name

Popular brands

Traktor Kontrol S8, User Manual

Search results

Summary of Contents for Kontrol S8

Reviews:

Related manuals for Kontrol S8

Brands by name

Popular brands