(1) Crossfader: controls the mix between the channel(s) assigned to its left and right side. Each
channel can be assigned to either side of the Crossfader with the Crossfader Assign Switches
located on the front panel (refer to section
cross-fading behavior can be adjusted with the
XF CURVE
knob on S8's front panel (refer to
for more information).
(2) CUE VOL knob: controls the headphone level for both headphone connectors on the front
panel.
(3) CUE MIX knob: balances your headphone mix between the signal going out to the
MAIN
and
the
CUE
. Audition a new track in your
CUE
and raise the channel's
GAIN
until the mix of both
tracks sounds good when the
CUE MIX
is in center position. That way, when you actually mix it
into the
MAIN
, you can be certain that it blends well.
(4) TEMPO encoder: controls the global tempo. Only Decks operating in TRAKTOR mode can
sync to the global tempo.
(5) BOOTH knob: controls overall volume of the signal being sent to the
BOOTH OUT
.
(6) GLOBAL section: allows you to enable and disable TRAKTOR's Snap and Quantize functions.
(7) MIC assignment buttons: allow you to assign microphone inputs to mixer channels.
(8) MAIN knob: controls the overall volume of the signal being sent to the
MAIN OUT
.
4.4.2.1 Crossfader
The Crossfader controls the mix between the channel(s) assigned to its left and right side via
the Crossfader Assign Switches on S8's front panel.
The Crossfader
Adjust the cross-fading behavior to fit your performance via the
XF CURVE
knob:
Hardware Reference
The Mixer
TRAKTOR KONTROL S8 - Manual - 216
Summary of Contents for Kontrol S8
Page 1: ...Manual...
