4.2.4
Loop Encoder
The Loop encoder is dedicated to looping functions on either Track Decks or Remix Decks. It
has a press function, as well as a segmented LED ring.
Loop Encoder
The LED ring around the encoder tells you which Deck is focused - blue for the primary
Deck, white for the secondary Deck.
Looping
1.
Press the Loop encoder to activate looping. A light starts circulating around the knob.
2.
Turn the knob to adjust loop size.
3.
Hold
SHIFT
and turn the knob to move a loop's position by the set loop size.
4.
Press the Loop encoder again to leave the loop.
→
The loop is deactivated, the loop markers are still visible.
You cannot permanently engage a loop when the
FLUX
button is active. The loop only re-
mains active for as long as you hold the encoder and turns off again when released. Adjust-
ments to loop size can be made whether a loop is active or not.
Moving the Playhead
While a loop is inactive, press and hold
SHIFT
, then turn the Loop encoder to move the play-
head in increments of the loop size.
Hardware Reference
The Deck
TRAKTOR KONTROL S8 - Manual - 171
Summary of Contents for Kontrol S8
Page 1: ...Manual...
