2.
Press pad 5 to jump the playback position backward by the loop-size value displayed on
the display. If doing so causes the Playhead to jump into an active Loop area, it continues
to loop again.
3.
Press pad 8 to jump the playback position forward by the beat-jump size defined in the
display. If you jump out of a loop this way, playback continues outside the loop.
3.4
Using FREEZE Mode
FREEZE mode takes the playhead position, adds the number of bars set as Freeze Slice Size
and splits this section of a track into eight equally sized slices. These are then mapped to the
adjacent pads, which light up blue. Press any of these pads to trigger playback from the map-
ped slice. Playback continues to the end of the track until you lift your finger off the pad.
In FREEZE mode, the numbers 1 - 8 are overlaid on the waveform to indicate the location of
the slices. The first row of pads triggers slices 1 - 4, the second row triggers slices 5 - 8
FREEZE overlay in the display.
The pads are now lit blue, and the Freeze slices are shown on the track's waveform. The pad
that is currently illuminated brightest represents the current playback position in the Freeze
area (see the image above).
Using Your S8—Getting Advanced
Using FREEZE Mode
TRAKTOR KONTROL S8 - Manual - 91
Summary of Contents for Kontrol S8
Page 1: ...Manual...
