TP-Link ARCHER C3150, User Manual

Page: 15 / 124

11
Chapter 2 Connect the Hardware
4 Turn on the modem, and then wait about 2 minutes for it to restart.
5
Turn on the router.
6 Verify that the following LEDs are on and solid before continuing with the
configuration.
Power
On
On
Internet
2.4G
On 5G
On
Note:
If the 2.4G LED and 5G LED are off, please press the Wi-Fi On/Off button on the side panel for 2 seconds
and check the LEDs again in a few seconds later.
Tips:
For optimum performance, orient the four antennas as shown in the drawing below.
30° 30°
7
Connect your computer to the router.
•
Method 1: Wired
Turn off the Wi-Fi on your computer and connect the devices as shown below.
Ethernet Cable
• Method 2: Wirelessly
Connect wirelessly by using the SSID (Network Name) and Wireless Password/PIN
printed on the product label at the bottom of the router.