TP-Link ARCHER C3150 User Manual Download Page 11

Page: 11 / 124

Chapter 1

Get to Know About Your Router

1 3 2 Back Panel

The router’s back panel shows the connection ports, buttons and antennas (view from
left to right). Refer to the following for detailed instructions.

Item

Description

Internet

This port is where you will connect the DSL/cable Modem, or Ethernet.

LAN1, LAN2, LAN3,

LAN4

These ports (1, 2, 3, 4) connect the router to the local PC(s).

Power

For connecting the router to power socket via the provided power adapter.

Power On/Off

The switch for the power. Press it to power on or off the router.

Antennas

Used for wireless operation and data transmit. Upright them for the best Wi-Fi
performance.

1 3 3 Side Panel

The router’s side panel shows the USB ports and buttons (view from left to right). Refer
to the following for detailed instructions.

Summary of Contents for ARCHER C3150





























































































































Search results

Summary of Contents for ARCHER C3150

Reviews:

Related manuals for ARCHER C3150

Brands by name

Popular brands

TP-Link ARCHER C3150, User Manual

Search results

Summary of Contents for ARCHER C3150

Reviews:

Related manuals for ARCHER C3150

Brands by name

Popular brands