TP-Link Archer C28HP, User Manual

Page: 8 / 111

4
Chapter 1
LED Explanation
Name Status Indication
WAN
Blue On The Internet is available.
Orange On The router’s WAN port is connected, but the Internet is not available.
Off The router’s WAN port is not connected.
PWR
On System initialization completes.
Blinking
System initialization or firmware upgrade is in progress. Do not
disconnect or power off the router.
Off Power is off.
2.4G/5G
On The corresponding wireless function (2.4G/5G) is working properly.
Off The corresponding wireless function (2.4G/5G) is disabled.
RE
Blinking
The router is connecting to the host network. This process will last in
the first 2 minutes.
On
The router has been successfully connected to the host network, and
it is working in Range Extender mode.
1. 2. 2. The Back Panel
The following parts (view from left to right) are located on the rear panel.
Item Description
Power Port For connecting the router to a power socket via the provided power adapter.
Power On/Off For powering on or off the router.
Wi-Fi On/Off Press and hold this button about 2 seconds to enable or disable Wireless function.
Reset Button
Use a pin to press and hold this button until all the LED turn on momentarily to reset
the router to its factory default settings.
WAN Port For connecting to a DSL/Cable modem, or an Ethernet port.