TP-Link Archer C28HP, User Manual

Page: 27 / 111

23
Chapter 4
4. 4. 2. Access Control
Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed
devices (Whitelist).
Block or allow specific client devices to access my network (via
wired or wireless).
1. Visit http://tplinkwifi.net , and log in with password you set for
the router.
2. Go to Advanced > Advanced-Settings > Access Control.
3. Enable Access Control .
4. Select the access mode to either block (recommended) or
allow the device(s) in the list.
To block specific device(s)
5 ) Select Blacklist and click Save .
6 ) Select the device(s) to be blocked in the Online Devices table
by ticking the box.
7 ) Click Block above the Online Devices table. The selected
devices will be added to Devices in Blacklist automatically.
To allow specific device(s)
1 ) Select Whitelist and click Save .
I want to:
How can I
do that?