TP-Link Archer C28HP, User Manual

Page: 71 / 111

67
Chapter 5
• PIN (Personal Identification Number) is an eight-character identification number preset to each router.
WPS supported devices can connect to your router with the PIN. The default PIN is printed on the label
of the router.
Use the Client’s PIN
Enter the client’s PIN in the field, and click Connect .
3. Success will appear on the above screen and the WPS LED on the router will keep on for five
minutes if the client has been successfully added to the network.
5. 5. Customize Your Network
5. 5. 1. Change LAN Settings
The extender is preset with a default LAN IP 192.168.0.254, with which you can log in to
the web management page. The LAN IP address, together with the Subnet Mask, also
defines the subnet that the connected devices are on. If the IP address conflicts with
another device on your local network or your network requires a specific IP subnet, you
can change it.
1. Visit http://tplinkwifi.net , and log in with the password you set for the extender.
2. Go to Settings > Network .
3. Select Use the following IP address .
4. Enter a new IP address as needed and leave the Subnet Mask as the default settings and
enter the gateway that is in the same subnet as the IP address. The gateway is usually the LAN
IP address of your extender.