TP-Link Archer C28HP, User Manual

Page: 55 / 111

51
Chapter 4
3. Focus on the Online Upgrade section, and click Upgrade .
4. Wait a few minutes for the upgrade and reboot to complete.
Tips:
If there’s a new and important firmware update for your router, you will see the notification (similar as shown below) on
your computer as long as a web browser is opened. Click
Upgrade now , and log into the web management page with the
username and password you set for the router. You will see the Firmware Upgrade page.
Manual Upgrade
1. Download the latest firmware file for the router from www.tp-link.com .
2. Visit http://tplinkwifi.net , and log in with password you set for the router.
3. Go to Advanced > System Tools > Firmware Upgrade .
4. Focus on the Device Information section. Make sure the downloaded firmware file is matched
with the Hardware Version .
5. Focus on the Manual Upgrade section. Click Browse to locate the downloaded new firmware
file, and click Upgrade .
6. Wait a few minutes for the upgrade and reboot to complete.
Restore Interrupted Upgrade after Power Failure
If your router cannot start up after an upgrade interruption due to power failure, follow
the steps below to restore the interrupted upgrade. Otherwise, your router cannot work
again.
1. Make sure you have the latest firmware file in your computer. If not, try another way to connect
your computer to the Internet and download the latest firmware file from www.tp-link.com .