TP-Link Archer C28HP, User Manual

Page: 15 / 111

11
Chapter 2
3 ) After successfully login, select Range Extender mode and follow Quick Setup to
complete the configuration.
Tips: Click Survey to choose your host network and fill in its wireless password.
2. Relocate: Place the router between your host router and the Wi-Fi dead zone. The
location you choose must be within the range of your existing host network.
Extended Network Host Network
Client Host Router High Power Router
3. Enjoy! The extended network shares the same SSID (wireless name) and password
as your host network.
2. 2. 4. Access Point Mode
This mode transforms your existing wired network to a wireless network.
Client High Power Router Wired Host Router
Ethernet4 Ethernet3 Ethernet1 Ethernet2 Internet
Ethernet4 Ethernet3 Ethernet1 Ethernet2
1. Turn on the router.
2. Connect the router to your wired host router’s Ethernet port via an Ethernet cable as
shown above.
3. Connect a computer to the router via an Ethernet cable or wirelessly by using the
SSID (network name) and password printed on the bottom label of the router.