TP-Link Archer C28HP, User Manual

Page: 42 / 111

38
Chapter 4
• LACP passive: enables LACP only when an LACP device is detected.
5. Specify two ports for link aggregation.
6. Click Save .
4. 7. 3. Configure to Support IPTV Service
Configure IPTV setup to enable Internet/IPTV/Phone service
provided by my Internet Service Provider (ISP).
1. Visit http://tplinkwifi.net , and log in with password you set for
the router.
2. Go to Advanced > Network > IPTV .
3. If your ISP provides the networking service based on IGMP
technology , e.g., British Telecom(BT) and Talk Talk in UK:
1 ) Check the box for IGMP Proxy and select the IGMP Version ,
either V2 or V3, as required by your ISP.
2 ) Click Save .
3 ) After configuring IGMP proxy, IPTV can work behind your router
now. You can connect your set-top box to any of the router’s
Ethernet port.
If IGMP is not the technology your ISP applies to provide
IPTV service:
1 ) Tick Enable IPTV .
2 ) Select the appropriate Mode according to your ISP
.
I want to:
How can
I do that?