Toyota Prius HSD 2006 Owner'S Manual Download

Page: 431 / 465

414

CAUTION

12 VOLT BATTERY PRECAUTIONS
When the 12 volt battery must be re-

placed, use the Prius designated bat-

tery.
The 12 volt battery produces flam-

mable and explosive hydrogen gas.

Do not cause a spark from the bat-

tery with tools.

Do not smoke or light a match near

the battery.

The electrolyte contains poisonous
and corrosive sulfuric acid.

Avoid contact with eyes, skin or
clothes.

Never ingest electrolyte.

Wear protective safety glasses when

working near the battery.

Keep children away from the bat-

tery.

EMERGENCY MEASURES

If electrolyte gets in your eyes,

flush your eyes with clean water

and get immediate medical atten-
tion. If possible, continue to apply

water with a sponge or cloth while

en route to the medical office.

If electrolyte gets on your skin,

thoroughly wash the contact area. If
you feel pain or burn, get medical

attention immediately.

If electrolyte gets on your clothes,
there is a possibility of its soaking

through to your skin, so immediate-
ly take off the exposed clothing and

follow the procedure above, if nec-

essary.

If you accidentally swallow electro-

lyte, drink a large quantity of water

or milk. Follow with milk of magne-
sia, beaten raw egg or vegetable

oil. Then go immediately for emer-

gency help.

83p035

Open the back door. Remove the lug-

gage storage box and 12 volt battery
cover.

If the back door does not open, see “If
you cannot operate back door opener” on

page 376.

Checking 12 volt battery

condition—

—Precautions

—Checking 12 volt battery

exterior

Summary of Contents for Prius HSD 2006


















































































































































































































































































































































































































































































Search results

Summary of Contents for Prius HSD 2006

Reviews:

Related manuals for Prius HSD 2006

Brands by name

Popular brands

Toyota Prius HSD 2006, Owner'S Manual

Search results

Summary of Contents for Prius HSD 2006

Reviews:

Related manuals for Prius HSD 2006

Brands by name

Popular brands