Toyota Prius HSD 2006 Page 105 Owner'S Manual Download

Page: 105 / 465

105

CAUTION

Do not adjust the mirror while the
vehicle is moving. Doing so may

cause the driver to mishandle the

vehicle and an accident may occur
resulting in death or serious inju-

ries.

Since the mirror surfaces can get
hot, keep your hands off them when

the defogger switch is on.

22p138a

To adjust a mirror, use the switches.

1. Master switch—To select the mirror to

be adjusted

Push the switch to “L” (left) or “R”
(right).

2. Control switch—To move the mirror

Push the switch in the desired direc-
tion.

The mirrors can be adjusted when the
hybrid system is in “ACC” or “IG

−

ON”

mode.

NOTICE

If ice should jam the mirror, do not
operate the control or scrape the mir-

ror face. Use a spray de

−

icer to free

the mirror.

—Power rear view mirror

control

Summary of Contents for Prius HSD 2006


















































































































































































































































































































































































































































































Search results

Summary of Contents for Prius HSD 2006

Reviews:

Related manuals for Prius HSD 2006

Brands by name

Popular brands

Toyota Prius HSD 2006, Owner'S Manual

Search results

Summary of Contents for Prius HSD 2006

Reviews:

Related manuals for Prius HSD 2006

Brands by name

Popular brands