Toyota Prius HSD 2006 Page 35 Owner'S Manual Download

Page: 35 / 465

For vehicles sold in U.S.A.

FCC ID: MOZB31EG
MADE IN JAPAN

FCC ID: MOZB31UG

MADE IN JAPAN

FCC ID: MOZRO

−

2TY

−

MADE IN JAPAN

FCC ID: PENASAT2

MADE IN JAPAN

This device complies with Part 15 of the
FCC Rules. Operation is subject to the

following two conditions:
(1) This device may not cause harmful
interference, and (2) this device must

accept any interference received, includ-
ing interference that may cause unde-

sired operation.

CAUTION

Changes or modifications not ex-
pressly approved by the party respon-

sible for compliance could void the

user’s authority to operate the equip-
ment.

For vehicles sold in Canada

This device complies with RSS

−

210 of

industry Canada. Operation is subject to

the following two conditions:
(1) This device may not cause interfer-
ence, and (2) this device must accept

any interference, including interference

that may cause undesired operation of
the device.

21p147

1. Lock switch
2. Indicator light
3. Unlock switch
4. Panic switch

The wireless remote control system is

designed to lock or unlock all the side

doors and back door, or activate the
theft deterrent system from a distance

within approximately 1 m (3 ft.) of the

vehicle.

When you operate any switch, push it

slowly and securely. At this time, the indi-
cator light flashes once.

Wireless remote control—

Summary of Contents for Prius HSD 2006


















































































































































































































































































































































































































































































Search results

Summary of Contents for Prius HSD 2006

Reviews:

Related manuals for Prius HSD 2006

Brands by name

Popular brands

Toyota Prius HSD 2006, Owner'S Manual

Search results

Summary of Contents for Prius HSD 2006

Reviews:

Related manuals for Prius HSD 2006

Brands by name

Popular brands