Toyota Prius HSD 2006 Page 371 Owner'S Manual Download

Page: 371 / 465

371

CAUTION

Make sure the rear seats are in

their original position.

When carrying the flat tire, se-

cure it using a tire tie

−

down

belts. Otherwise, the flat tire

may fly out in case of the sud-

den braking or an accident, re-

sulting in death or serious inju-

ry.

10. Check the air pressure of the re-

placed tire.

Adjust the air pressure to the specifi-

cation designated on page 429. If the

pressure is lower than specified, drive

slowly to the nearest Toyota dealer

and fill to the correct pressure.
Do not forget to reinstall the tire infla-

tion valve cap as dirt and moisture

could get into the valve core and pos-

sibly cause air leakage. If the cap is

missing, have a new one put on as

soon as possible.
As soon as possible after changing

wheels, tighten the wheel nuts to the

torque specified on page 429 with a

torque wrench. Have a technician re-

pair the flat tire.
After repairing the flat tire, change it

with compact spare tire and reinstall

the wheel ornament.

CAUTION

Take due care in handling the or-

nament to avoid unexpected per-

sonal injury.

—After changing wheels

Summary of Contents for Prius HSD 2006


















































































































































































































































































































































































































































































Search results

Summary of Contents for Prius HSD 2006

Reviews:

Related manuals for Prius HSD 2006

Brands by name

Popular brands

Toyota Prius HSD 2006, Owner'S Manual

Search results

Summary of Contents for Prius HSD 2006

Reviews:

Related manuals for Prius HSD 2006

Brands by name

Popular brands