Toyota Prius HSD 2006 Page 311 Owner'S Manual Download

Page: 311 / 465

311

This device complies with Part 15 of the
FCC Rules and with RSS

−

210 of the IC

Rules. Operation is subject to the fol-

lowing two conditions: (1) This device
may not cause harmful interference, and

(2) this device must accept any interfer-

ence received, including interference
that may cause undesired operation.

WARNING: This transmitter has been

tested and complies with FCC and IC
Rules. Changes or modifications not

expressly approved by the party re-

sponsible for compliance could void
the user’s authority to operate the

device.

To use the box, open the lid as shown

in the following illustrations.

CAUTION

To reduce the chance of injury in
case of an accident or a sudden

stop, always keep the auxiliary box

closed while driving.

Auxiliary box on the ceiling—

As this box is designed for holding

a light object such as an eyeglass,
do not place any heavy objects in

it. Heavy objects may cause the

holder to open and contents to fly
out resulting in injuries.

NOTICE

Auxiliary box on the ceiling—
In hot weather, inside of the vehicle

ceiling becomes very hot. Do not

leave anything flammable or deform-
able such as a lighter, the glasses,

etc. inside.

28p117

Front ceiling

28p011c

Front side of the console box

Auxiliary boxes

Summary of Contents for Prius HSD 2006


















































































































































































































































































































































































































































































Search results

Summary of Contents for Prius HSD 2006

Reviews:

Related manuals for Prius HSD 2006

Brands by name

Popular brands

Toyota Prius HSD 2006, Owner'S Manual

Search results

Summary of Contents for Prius HSD 2006

Reviews:

Related manuals for Prius HSD 2006

Brands by name

Popular brands