Toyota Prius HSD 2006 Page 56 Owner'S Manual Download

Page: 56 / 465

Lower the head restraints to the lowest

position. Push down the lock release
button and fold the seatback down.

Each seatback can be folded separately.
This will enlarge the luggage compartment

as far as the seatbacks. See “Cargo and

luggage” on page 342 for precautions
when loading luggage.

CAUTION

When only rear left seat is folded
down, rear seat alone can be used.

Never sit on the center seat because

the rear center seat belt cannot be
fastened correctly when the rear left

seat is folded down.

22p203

BEFORE RETURNING REAR SEAT
Make sure the shoulder belt pass
through the guide when returning the

seatback up.

If the shoulder belt on the rear right seat

is off the guide, the air vent for cooling

the hybrid battery may be blocked by the
belt. If the hybrid battery cannot be

cooled, the output performance is limited,

reducing the driving performance.

Fold

−

down rear seat

Summary of Contents for Prius HSD 2006


















































































































































































































































































































































































































































































Search results

Summary of Contents for Prius HSD 2006

Reviews:

Related manuals for Prius HSD 2006

Brands by name

Popular brands

Toyota Prius HSD 2006, Owner'S Manual

Search results

Summary of Contents for Prius HSD 2006

Reviews:

Related manuals for Prius HSD 2006

Brands by name

Popular brands