Toyota Prius HSD 2006 Page 135 Owner'S Manual Download

Page: 135 / 465

135

(d) Electric Power Steering System

Warning Light

This light comes on when the power
steering control system fails.

CAUTION

If this light comes on, take your ve-
hicle to the Toyota dealer as soon as

possible. In this case, you may feel

the heavy steering wheel maneuver-
ing. Drive your vehicle while gripping

the steering wheel firmly.

(e) Hybrid System Warning Light

(

)

This light comes on if there is a problem

in the electric motor, inverter unit, hybrid

battery, etc.
If this light is on, stop your vehicle in a

safe place immediately and contact your
Toyota dealer.
Even if the hybrid system warning light

comes on, you can temporarily increase
the vehicle speed by depressing the ac-

celerator pedal. Immediately pull up your
vehicle to a safe place and contact your

Toyota dealer.

(f) Hybrid Battery Warning Light

This light comes on in the following

cases.
a. The hybrid battery voltage drops when

the hybrid transaxle is left in “N” position.
The system works properly if you put the

hybrid transaxle in “P” position and the

light goes off.
b. The hybrid battery is discharged.
If this light comes on with the “READY”
light on in case of b., stop your vehicle

in a safe place and contact your Toyota

dealer.

(g) Automatic Headlight Leveling Sys-

tem Warning Light

This light warns that there is a problem

somewhere in the automatic headlight
leveling system.

If it comes on, have your vehicle checked

by your Toyota dealer,

Summary of Contents for Prius HSD 2006


















































































































































































































































































































































































































































































Search results

Summary of Contents for Prius HSD 2006

Reviews:

Related manuals for Prius HSD 2006

Brands by name

Popular brands

Toyota Prius HSD 2006, Owner'S Manual

Search results

Summary of Contents for Prius HSD 2006

Reviews:

Related manuals for Prius HSD 2006

Brands by name

Popular brands