Toyota Prius HSD 2006 Owner'S Manual Download

Page: 173 / 465

173

The other party’s voice outputs from the

driver’s speaker. When the received calls

or received voice outputs, the audio from

the audio system will be muted.

INFORMATION

Talk alternately with the other party

on the phone. If you talk at the

same time, the voice may not reach

each other. (It is not a malfunc-

tion.)

Keep the volume of receiving voice

down. Otherwise, echo is coming

up. When you talk on the phone,

speak clearly towards the micro-

phone.

In the following situations, your

voice may not reach the other party.

Driving on unpaved road. (Mak-

ing a traffic noise.)

Driving at the high speed.

The window is open.

Turning the air conditioning vents

towards the microphone.

The sound of the air conditioning

fan is loud.

27p180

1. Indicates the condition of Bluetooth

connection.

“Blue”

indicates an excellent connection

to Bluetooth.

“Yellow”

indicates a bad connection to

Bluetooth, resulting in possible deteriora-

tion of voice quality.

no connection to Bluetooth.

2. Indicates the amount of battery

charge left.

Empty

Full

It is not displayed while the Bluetooth is

connecting or the phone book data is be-

ing transferred.
The amount left does not always corre-

spond with the one of your cellular phone.

This system does not have a charging

function.

3. Indicates the receiving area.

“Rm”

is displayed when receiving in

Roaming area.

“Hm”

is displayed when receiving in

Home area.

4. Indicates the level of reception.

Too bad

Excellent

The level of reception does not always

correspond with the one of your cellular

phone.

Summary of Contents for Prius HSD 2006


















































































































































































































































































































































































































































































Search results

Summary of Contents for Prius HSD 2006

Reviews:

Related manuals for Prius HSD 2006

Brands by name

Popular brands

Toyota Prius HSD 2006, Owner'S Manual

Search results

Summary of Contents for Prius HSD 2006

Reviews:

Related manuals for Prius HSD 2006

Brands by name

Popular brands