Toyota Prius HSD 2006 Owner'S Manual Download

Page: 327 / 465

327

CAUTION

Do not overestimate the anti

−

lock

brake system: Although the anti

−

lock

brake system assists in providing ve-

hicle control, it is still important to
drive with all due care and maintain

a moderate speed and safe distance

from the vehicle in front of you, be-
cause there are limits to the vehicle

stability and effectiveness of steering

wheel operation even with the anti

−

lock brake system on.
If tire grip performance exceeds its

capability, or if hydroplaning occurs
during high speed driving in the rain,

the anti

−

lock brake system does not

provide vehicle control.

Anti

−

lock brake system is not de-

signed to shorten the stopping dis-

tance: Always drive at a moderate

speed and maintain a safe distance
from the vehicle in front of you.

Compared with vehicles without an

anti

−

lock brake system, your vehicle

may require a longer stopping dis-

tance in the following cases:

Driving on rough, gravel or snow

−

covered roads.

Driving with tire chains installed.

Driving over the steps such as the

joints on the road.

Driving on roads where the road

surface is pitted or has other differ-

ences in surface height.

Install all 4 tires of specified size at

appropriate pressure: The anti

−

lock

brake system detects vehicle speeds

using the speed sensors for respec-

tive wheels’ turning speeds. The use
of tires other than specified may fail

to detect the accurate turning speed,

resulting in a longer stopping dis-
tance.

30p002b

Vehicle sold in U.S.A.

30p007b

Vehicle sold in Canada

Summary of Contents for Prius HSD 2006


















































































































































































































































































































































































































































































Search results

Summary of Contents for Prius HSD 2006

Reviews:

Related manuals for Prius HSD 2006

Brands by name

Popular brands

Toyota Prius HSD 2006, Owner'S Manual

Search results

Summary of Contents for Prius HSD 2006

Reviews:

Related manuals for Prius HSD 2006

Brands by name

Popular brands