Toyota Prius HSD 2006 Page 463 Owner'S Manual Download

Page: 463 / 465

CAUTION

If an accident occurs

Pull your vehicle off the road, push the “P” posi-

tion switch, stop the hybrid system and if the key
is inserted into key slot, remove it.

In order to avoid personal injuries, do not touch
any high voltage wirings and their connectors, and

high voltage parts (inverter unit, hybrid battery,

etc.).

If some exposed electric wires are protruding in-

side or outside of your vehicle, an electric shock
may occur. Never touch the electric wires.

If fluid leaks or gets in some parts of the vehicle,

never touch it because it may be electrolyte
(strong alkali) from the hybrid battery. If it gets

into your skin or eyes, wash off immediately with

a large amount of water, if possible, boric acid
solution, and get immediate medical attention in

order to help avoid serious injury.

If a vehicle fire occurs, extinguish it using a fire

extinguisher for the exclusive use on electric fires.

Or, use a large amount of water to prevent flam-
mable gas from being generated from the batteries.

If your vehicle needs to be towed, do it with the
front wheels raised. For details on towing, see “If

your vehicle needs to be towed” on page 372 in

Section 5.

Summary of Contents for Prius HSD 2006


















































































































































































































































































































































































































































































Search results

Summary of Contents for Prius HSD 2006

Reviews:

Related manuals for Prius HSD 2006

Brands by name

Popular brands

Toyota Prius HSD 2006, Owner'S Manual

Search results

Summary of Contents for Prius HSD 2006

Reviews:

Related manuals for Prius HSD 2006

Brands by name

Popular brands