Toyota Prius HSD 2006 Page 265 Owner'S Manual Download

Page: 265 / 465

265

NOTICE

This equipment has been tested and

found to comply with the limits for a

class B digital device, pursuant to

Part 15 of the FCC Rules. These

limits are designed to provide reason-

able protection against harmful inter-

ference in a residential installation.

This equipment generates, uses and

can radiate radio frequency energy

and, if not installed and used in ac-

cordance with the instructions, may

cause harmful interference to radio

communications. However, there is

no guarantee that interference will not

occur in a particular installation.

If this equipment does cause harmful
interference to radio or television re-

ception, which can be determined by

turning the equipment off and on, the
user is encouraged to try to correct

the interference by one or more of

the following measures:
— Reorient or relocate the receiving

antenna.
— Increase the separation between

the equipment and receiver.
— Connect the equipment into an out-
let on a circuit different from that to

which the receiver is connected.
— Consult the dealer or an experi-

enced radio/TV technician for help.
Information to user
Alternation or modifications carried

out without appropriate authorization
may invalidate the user’s right to op-

erate the equipment.

This XM tuner supports “Audio Ser-
vices” (Music and Talk) of only XM

satellite radio and “Text Information”,

linked to the respective “Audio Ser-
vices”.
*Text Information includes, Station

Name, (Artist) Name, (Song) Title and
Category Name.

Summary of Contents for Prius HSD 2006


















































































































































































































































































































































































































































































Search results

Summary of Contents for Prius HSD 2006

Reviews:

Related manuals for Prius HSD 2006

Brands by name

Popular brands

Toyota Prius HSD 2006, Owner'S Manual

Search results

Summary of Contents for Prius HSD 2006

Reviews:

Related manuals for Prius HSD 2006

Brands by name

Popular brands