Toyota AURION 2013 Owner'S Manual Download Page 240

Page: 240 / 371

218

Touch-screen audio system

INTERIOR FEATURES

SETTING THE HANDS-FREE SYSTEM

You can set the hands-free system to your desired settings.

1. Setting the sound.
2. Phonebook settings.

To display the TELEPHONE SETTINGS screen shown above, press SETUP, and touch
TELEPHONE on the SETUP screen.

Setting the sound

1. Touch SOUND SETTINGS on the

TELEPHONE SETTINGS screen.
a.  Changes the call volume.
b.  Changes the ring tone volume.
c.  Changes the ring tone.
d.  Restore default settings.

HINT: Refer to the following procedures for
details.

Setting the volume−

1. Touch CALL VOLUME or RING TONE

VOLUME on the SOUND SETTINGS
screen.

2. Touch [−] or [+] to lower or raise the

volume, and then OK.

3. When you complete all settings, touch

OK.

STNDA0057Ea

Not for Reproduction

Summary of Contents for AURION 2013




















































































































































































































































































































































































Search results

Summary of Contents for AURION 2013

Reviews:

Related manuals for AURION 2013

Brands by name

Popular brands

Toyota AURION 2013, Owner'S Manual

Search results

Summary of Contents for AURION 2013

Reviews:

Related manuals for AURION 2013

Brands by name

Popular brands