Toyota AURION 2013 Owner'S Manual Download Page 226

Page: 226 / 371

204

Touch-screen audio system

INTERIOR FEATURES

Operating on the list screen

1. Press [

] or [

] on

to move the cursor up or down.

2. Press

to select an item.

When the folder or album is selected, the SELECT FILE screen is displayed.

CAUTION

To reduce the risk of an accident

Exercise care when operating the audio switches on the steering wheel.

HANDS-FREE SYSTEM (FOR MOBILE PHONES)

The hands-free system is a function that allows you to use your mobile phone without
touching it.
This system supports Bluetooth

. Bluetooth

is a wireless data system that allows the

mobile phone to wirelessly connect to the hands-free system and make / receive calls.

Telephone switch

1. Off hook switch

– Sending.

– Receiving.

2. On hook switch

– End call.

– Refuse call.

3. Volume switch

– Increase the volume.

– Decrease the volume.

– TELEPHONE screen display.

4. Back switch

– Return to the previous screen.

5. Cursor switch

– Selects lists.

– Selects tabs.

6. Enter switch

– Select items.

Without paddle shift switches

With paddle shift switches

CTY33AV251a

Not for Reproduction

Summary of Contents for AURION 2013




















































































































































































































































































































































































Search results

Summary of Contents for AURION 2013

Reviews:

Brands by name

Popular brands

Toyota AURION 2013, Owner'S Manual

Search results

Summary of Contents for AURION 2013

Reviews:

Brands by name

Popular brands