Toyota AURION 2013 Owner'S Manual Download Page 257

Page: 257 / 371

235

Using the storage features

INTERIOR FEATURES

Using the storage features

STORAGE FEATURES OVERVIEW

Bottle holders / door pockets

Cup holders

Glove box

Rear console box

Auxiliary boxes

CAUTION

• Do not leave glasses in the storage spaces as they may be deformed by heat or

cracked if they come into contact with other stored items.

• Do not leave lighters or spray cans in the storage spaces as they may explode.

If they come into contact with other stored items, the lighter may catch fire or the
spray can may release gas, causing a fire hazard.

Not for Reproduction

Summary of Contents for AURION 2013




















































































































































































































































































































































































Search results

Summary of Contents for AURION 2013

Reviews:

Brands by name

Popular brands

Toyota AURION 2013, Owner'S Manual

Search results

Summary of Contents for AURION 2013

Reviews:

Brands by name

Popular brands