Home
/
Toyota
/
AURION 2013
/
Owner'S Manual

Toyota AURION 2013, Owner'S Manual, Page: 248 / 371

Share

Page: 248 / 371

Toyota AURION 2013 Owner'S Manual Download Page 248

226

Touch-screen audio system

INTERIOR FEATURES

Deleting the call history−

1. Display the PHONEBOOK SETTINGS

screen, refer to page 219.

2. Touch DELETE CALL HISTORY on the

PHONEBOOK SETTINGS screen.
If your phone supports PBAP service,
the AUTOMATIC PHONEBOOK
DOWNLOAD setting needs to be set to
OFF, refer to page 220.

3. Choose the desired history to delete.
4. Choose the data to delete.

To delete all data, touch ALL DELETE.

5. A confirmation message will be

displayed. If everything is correct,
touch YES.

INFORMATION

Deleting call history in a different way

1.  Display the TELEPHONE screen, refer to page 209.
2.  Touch CALL HISTORY on the TELEPHONE screen.
3.  Touch DELETE on the CALL HISTORY screen.
4.  Follow the steps DELETING THE CALL HISTORY above.

Not for Reproduction

«
...
246
247
248
249
250
...
»

Summary of Contents for AURION 2013




















































































































































































































































































































































































Reviews:

No comments