Toyota AURION 2013 Owner'S Manual Download Page 312

Page: 312 / 371

290

Do-it-yourself maintenance

MAINTENANCE AND CARE

3. Remove the fender liner clip.

Step 1: After turning the clip, pull it
out slightly until it stops.
Step 2: Turn the clip again and then
remove it.

4. Partly remove the fender liner and turn

the bulb base counterclockwise.

5. Remove the light bulb.
6. Reinstall the new light bulb in the

reverse of removal.

Fog light

1. Turn the steering in the opposite

direction to the fog light bulb that you
wish to replace.
E.g. Turn the steering wheel left to
replace the right-hand fog light bulb.

Not for Reproduction

Summary of Contents for AURION 2013




















































































































































































































































































































































































Search results

Summary of Contents for AURION 2013

Reviews:

Related manuals for AURION 2013

Brands by name

Popular brands

Toyota AURION 2013, Owner'S Manual

Search results

Summary of Contents for AURION 2013

Reviews:

Related manuals for AURION 2013

Brands by name

Popular brands