Toyota 2004 Matrix Owner'S Manual Download Page 93

Page: 93 / 310

’04 MATRIX_U (L/O 0307)

2004 MATRIX from Oct. ’03 Prod. (OM12861U)

Adjust the mirror so that you can just

see the rear of your vehicle in the mir-
ror.
This mirror is equipped with auto anti

−

glare function. The function is designed

to reduce glare from the headlights of

the vehicle behind you during night
driving.

When the ignition key is inserted and

turned on, the inside rear view mirror al-
ways turns on in the automatic function

mode.
The indicator illuminates to show you that

the function is on.

In automatic function mode, if the mirror

detects light from the headlights of the

vehicle behind you, the mirror surface
darkens slightly to reduce the reflected

light.
To turn off the automatic function, push
and release the “

” switch. The indica-

tor light will turn off.
To turn on the automatic function again,

push and release the “

” switch. The

indicator light will turn on.
Adjust it before driving so that the rear

view is in the best condition.
When the inside air temperature is low, it

may take a little longer for the mirror to
darken in response to the detection of

headlights.

CAUTION

Do not adjust the mirror while the
vehicle is moving. Doing so may

cause the driver to mishandle the ve-

hicle and an accident may occur re-
sulting in death or serious injuries.

To ensure correct functioning of an

anti

−

glare mirror sensor located on the

back side of the mirror, do not touch

or cover the sensor with your finger or

a piece of cloth, etc.

Auto anti

−

glare inside rear

view mirror

Summary of Contents for 2004 Matrix























































































































































































































































































































Search results

Summary of Contents for 2004 Matrix

Reviews:

Related manuals for 2004 Matrix

Brands by name

Popular brands

Toyota 2004 Matrix, Owner'S Manual

Search results

Summary of Contents for 2004 Matrix

Reviews:

Related manuals for 2004 Matrix

Brands by name

Popular brands