Toyota 2004 Matrix Owner'S Manual Download Page 56

Page: 56 / 310

’04 MATRIX_U (L/O 0307)

2004 MATRIX from Oct. ’03 Prod. (OM12861U)

If your seat belts cannot be fastened se-

curely because they are not long enough,

a personalized seat belt extender is avail-
able from your Toyota dealer free of

charge.
Please contact your local Toyota dealer to
order the proper required length for the

extender. Bring the heaviest coat you ex-

pect to wear for proper measurement and
selection of length. Additional ordering in-

formation is available at your Toyota deal-

er.

CAUTION

When using the seat belt extender,
observe the following precautions.

Failure to follow these instructions

could reduce the effectiveness of the
seat belt restraint system in case of

an accident, increasing the chance of

personal injury.

Remember that the extender pro-

vided for you may not be safe when

used on a different vehicle, for
another person, or at a different

seating position than the one origi-

nally intended.

If the seat belt extender has been

connected to the driver’s seat belt

buckle without wearing the seat belt

when using the extender in the

driver’s seat, the SRS driver’s air-

bag system will judge that the driv-

er wears the seat belt even if not

wearing it. In this case, the driver’s

airbag may not activate correctly,

causing death or serious injury in

the event of collision. Be sure to

wear the seat belt with the seat belt

extender.

Be sure to wear the seat belt with-

out the seat belt extender if you

can fasten the seat belt without the

extender.

Do not use the seat belt extender

when installing a child restraint

system on the front or rear passen-

ger seat. If installing a child re-

straint system with the seat belt

extender connected to the seat belt,

the seat belt will not securely hold

the child restraint system, which

could cause death or serious injury

to the child or other passengers in

the event of collision.

—Seat belt extender

Summary of Contents for 2004 Matrix























































































































































































































































































































Search results

Summary of Contents for 2004 Matrix

Reviews:

Related manuals for 2004 Matrix

Brands by name

Popular brands

Toyota 2004 Matrix, Owner'S Manual

Search results

Summary of Contents for 2004 Matrix

Reviews:

Related manuals for 2004 Matrix

Brands by name

Popular brands