Toyota 2004 Matrix Owner'S Manual Download Page 69

Page: 69 / 310

’04 MATRIX_U (L/O 0307)

2004 MATRIX from Oct. ’03 Prod. (OM12861U)

In a severe side impact, the side airbag

sensor triggers the side airbag inflators.

At this time a chemical reaction in the
inflators quickly fills the airbags with non

−

toxic gas to help restrain the lateral mo-

tion of the occupants.
When the airbags inflate, they produce a

fairly loud noise and release some smoke

and residue along with non

−

toxic gas. This

does not indicate a fire. This smoke may

remain inside the vehicle for some time,

and may cause some minor irritation to
the eyes, skin or breathing. Be sure to

wash off any residue as soon as possible

to prevent any potential skin irritation with
soap and water. If you can safely exit

from the vehicle, you should do so imme-

diately.
Deployment of the airbags happens in a

fraction of a second, so the airbags must
inflate with considerable force. While the

system is designed to reduce serious inju-

ries, it may also cause minor burns or
abrasions and swelling.
Front seats may be hot for several min-
utes, but the airbags themselves will not

be hot. The airbags are designed to inflate

only once.

CAUTION

SRS side airbags inflate with consid-
erable force. To reduce the possibility

of death or serious injury when they

inflate, the driver and front passenger
must:

Wear their seat belts properly.

Remain properly seated with their

backs upright and against the seats

at all times.

Do not allow anyone to lean against
the front door when the vehicle is

in use, since the side airbag could

inflates with considerable speed
and force. Otherwise, he/she may

be killed or be seriously injured.

Special care should be taken espe-
cially when you have a small child

in the vehicle.

Sit up straight and well back in the
seat, distributing your weight evenly

in the seat. Do not apply excessive

weight to the outer side of the
seats on vehicles with side airbags.

Summary of Contents for 2004 Matrix























































































































































































































































































































Search results

Summary of Contents for 2004 Matrix

Reviews:

Related manuals for 2004 Matrix

Brands by name

Popular brands

Toyota 2004 Matrix, Owner'S Manual

Search results

Summary of Contents for 2004 Matrix

Reviews:

Related manuals for 2004 Matrix

Brands by name

Popular brands