Toyota 2004 Matrix Owner'S Manual Download Page 146

Page: 146 / 310

’04 MATRIX_U (L/O 0307)

128

2004 MATRIX from Oct. ’03 Prod. (OM12861U)

TRAF (Traffic)

This button turns the traffic announcement

(TA) feature on and off.
By pushing the “< >” button, “TRAF” ap-

pears on the display and the radio will

start seeking any traffic program station.
When a traffic program station is found,

“TRAF” will be displayed (<TRAF>). If no
traffic program stations are found, “No

Traffic” will appear on the display.
After the traffic announcement program is

over, the display returns to the previous

mode.
If no traffic program station is found, “No

Traffic” will appear on the display for 5

seconds and the display returns to the

previous mode. If the “TRAF” button is

pushed when the cassette player or the

compact disc player is on, the radio will

start seeking traffic program stations. Au-

dio source will change only if there is a

traffic announcement.
When a “TA” is received, the radio stores

the volume of the previous mode and ad-

justs the volume to the previous interrupt
volume. During the traffic announcement,

you can adjust the volume using the

“PWR/VOL”.

The adjusted volume will be used as the

new default interrupt volume. The interrupt

volume has a minimum default setting.
The stored interrupt volume will be the

greater of the current volume and the

minimum default setting. After an interrupt,
the radio system will return to the volume

that was active before the interrupt.

TUNE (Tuning)

Turn the knob clockwise to step up the

frequency. Turn the knob counterclockwise
to step down the frequency.

Summary of Contents for 2004 Matrix























































































































































































































































































































Search results

Summary of Contents for 2004 Matrix

Reviews:

Related manuals for 2004 Matrix

Brands by name

Popular brands

Toyota 2004 Matrix, Owner'S Manual

Search results

Summary of Contents for 2004 Matrix

Reviews:

Related manuals for 2004 Matrix

Brands by name

Popular brands