Toyota 2004 Matrix Owner'S Manual Download Page 271

Page: 271 / 310

’04 MATRIX_U (L/O 0307)

271

2004 MATRIX from Oct. ’03 Prod. (OM12861U)

WHEN TO USE SNOW TIRES OR

CHAINS
Snow tires or chains are recommended
when driving on snow or ice.

On wet or dry roads, conventional tires
provide better traction than snow tires.

SNOW TIRE SELECTION
If you need snow tires, select tires of

the same size, construction and load

capacity as the originally installed tires.
Also, on four

−

wheel drive models, all

the tires must be the same brand and

have the same tread patterns.

Do not use tires other than those men-

tioned above. Do not install studded tires

without first checking local regulations for
possible restrictions.

CAUTION

Observe the following instructions.
Otherwise, an accident may occur re-

sulting in death or serious injuries.

Do not use snow tires other than
the manufacturer’s recommended si-

ze, as this may cause dangerous

handling characteristics resulting in
loss of control.

Four

−

wheel drive models:

Do not use snow tires of different

brands, sizes, construction or tread

patterns, as this may cause danger-
ous handling characteristics result-

ing in loss of control.

SNOW TIRE INSTALLATION
Snow tires should be installed on all

wheels.

Installing snow tires on the front wheels

only can lead to an excessive difference
in road grip capability between the front

and rear tires, which could cause loss of

vehicle control.
When storing removed tires, you should

store them in a cool dry place.
Mark the direction of rotation and be sure

to install them in the same direction when

replacing.

CAUTION

Do not drive with the snow tires
incorrectly inflated.

Never drive over 120 km/h (75 mph)

with any type of snow tires.

Installing snow tires and

chains

Summary of Contents for 2004 Matrix























































































































































































































































































































Search results

Summary of Contents for 2004 Matrix

Reviews:

Related manuals for 2004 Matrix

Brands by name

Popular brands

Toyota 2004 Matrix, Owner'S Manual

Search results

Summary of Contents for 2004 Matrix

Reviews:

Related manuals for 2004 Matrix

Brands by name

Popular brands