Toyota 2004 Matrix Owner'S Manual Download Page 29

Page: 29 / 310

’04 MATRIX_U (L/O 0307)

2004 MATRIX from Oct. ’03 Prod. (OM12861U)

REAR DOOR CHILD

−

PROTECTORS

Move the lock lever to the “LOCK”
position as shown on the label.

This feature allows you to lock a rear
door so it can be opened from the outside

only, not from inside. We recommend us-

ing this feature whenever small children
are in the vehicle.

CAUTION

Before driving, be sure that the doors
are closed and locked, especially

when small children are in the ve-

hicle. Along with the proper use of
seat belts, locking the doors helps

prevent the driver and passengers

from being thrown out from the ve-
hicle during an accident. It also helps

prevent the doors from being opened

unintentionally.

Locking operation

Unlocking operation

—Wireless remote control

Summary of Contents for 2004 Matrix























































































































































































































































































































Search results

Summary of Contents for 2004 Matrix

Reviews:

Related manuals for 2004 Matrix

Brands by name

Popular brands

Toyota 2004 Matrix, Owner'S Manual

Search results

Summary of Contents for 2004 Matrix

Reviews:

Related manuals for 2004 Matrix

Brands by name

Popular brands