Toyota 2004 Matrix Owner'S Manual Download Page 41

Page: 41 / 310

’04 MATRIX_U (L/O 0307)

2004 MATRIX from Oct. ’03 Prod. (OM12861U)

This indicates that the fuel filler door

is on the left side of your vehicle.

1. To open the fuel filler door, pull the

lever up.
When refueling, turn off the engine.

CAUTION

Do not smoke, cause sparks or al-
low open flames when refueling.

The fumes are flammable.

When opening the cap, do not re-
move the cap quickly. In hot weath-

er, fuel under pressure could cause

injury by spraying out of the filler
neck if the cap is suddenly re-

moved.

2. To remove the fuel tank cap, turn

the cap slowly counterclockwise,
then pause slightly before removing

it. After removing the cap, hang it

on the cap hanger.

It is not unusual to hear a slight swoosh

when the cap is opened. When installing,
turn the cap clockwise till you hear a

click.
If the cap is not tightened securely, the
malfunction indicator lamp comes on.

Make sure the cap is tightened securely.
The indicator lamp goes off after driving

several times. If the indicator lamp does

not go off, contact your Toyota dealer as
soon as possible.

Fuel tank cap

Summary of Contents for 2004 Matrix























































































































































































































































































































Search results

Summary of Contents for 2004 Matrix

Reviews:

Related manuals for 2004 Matrix

Brands by name

Popular brands

Toyota 2004 Matrix, Owner'S Manual

Search results

Summary of Contents for 2004 Matrix

Reviews:

Related manuals for 2004 Matrix

Brands by name

Popular brands