Toyota 2004 Matrix Owner'S Manual Download Page 63

Page: 63 / 310

’04 MATRIX_U (L/O 0307)

2004 MATRIX from Oct. ’03 Prod. (OM12861U)

Deployment of the airbags happens in a

fraction of a second, so the airbags must

inflate with considerable force. While the
system is designed to reduce serious inju-

ries, primarily to the head and chest, it

may also cause other, less severe injuries
to the face, chest, arms and hands. These

are usually in the nature of minor burns

or abrasions and swelling, but the force of
a deploying airbag can cause more seri-

ous injuries, especially if an occupant’s

hands, arms, chest or head is in close
proximity to the airbag module at the time

of deployment. This is why it is important

for the occupant to: avoid placing any
object or part of the body between the

occupant and the airbag module; sit

straight and well back into the seat; wear
the available seat belt properly; and sit as

far as possible from the airbag module,

while still maintaining control of the ve-
hicle.
Parts of the airbag module (steering wheel
hub, airbag cover and inflator) may be hot

for several minutes after deployment, so

do not touch! The airbags inflate only
once. The windshield may be damaged by

absorbing some of the force of the inflat-

ing airbag.

CAUTION

The driver or front passenger who is
too close to the steering wheel or

dashboard during airbag deployment

can be killed or seriously injured.
Toyota strongly recommends that:

The driver sit as far back as pos-

sible from the steering wheel while
still maintaining control of the ve-

hicle.

The front passenger sit as far back

as possible from the dashboard.

All vehicle occupants be properly
restrained using the available seat

belts.

For instructions and precautions con-

cerning the seating position, see

“—Front seat precautions” on page
28 in this Section.

Do not sit on the edge of the seat
or lean against the dashboard when

the vehicle is in use, since the

front passenger airbag could inflate
with considerable speed and force.

Anyone who is up against, or very

close to, an airbag when it inflates,
can be killed or seriously injured.

Sit up straight and well back in the

seat, and always use your seat belt
properly.

Summary of Contents for 2004 Matrix























































































































































































































































































































Search results

Summary of Contents for 2004 Matrix

Reviews:

Related manuals for 2004 Matrix

Brands by name

Popular brands

Toyota 2004 Matrix, Owner'S Manual

Search results

Summary of Contents for 2004 Matrix

Reviews:

Related manuals for 2004 Matrix

Brands by name

Popular brands