Toyota 2004 Matrix Owner'S Manual Download Page 276

Page: 276 / 310

’04 MATRIX_U (L/O 0307)

276

2004 MATRIX from Oct. ’03 Prod. (OM12861U)

CAUTION

BATTERY PRECAUTIONS
The battery produces flammable and

explosive hydrogen gas.

Do not cause a spark from the bat-

tery with tools.

Do not smoke or light a match near
the battery.

The electrolyte contains poisonous
and corrosive sulfuric acid.

Avoid contact with eyes, skin or

clothes.

Never ingest electrolyte.

Wear protective safety glasses when

working near the battery.

Keep children away from the bat-
tery.

EMERGENCY MEASURES

If electrolyte gets in your eyes,

flush your eyes with clean water

immediately and get immediate
medical attention. If possible, con-

tinue to apply water with a sponge

or cloth while en route to the medi-
cal office.

If electrolyte gets on your skin,
thoroughly wash the contact area. If

you feel pain or burning, get medi-

cal attention immediately.

If electrolyte gets on your clothes,

there is a possibility of its soaking

through to your skin, so immediate-
ly take off the exposed clothing and

follow the procedure above, if nec-

essary.

If you accidentally swallow electro-

lyte, drink a large quantity of water
or milk. Follow with milk of magne-

sia, beaten raw egg or vegetable

oil. Then go immediately for emer-
gency help.

Terminals

Ground cable

Hold

−

down

clamp

Check the battery for corroded or loose

terminal connections, cracks, or loose
hold

−

down clamp.

a. If the battery is corroded, wash it off

with a solution of warm water and bak-

ing soda. Coat the outside of the termi-

nals with grease to prevent further cor-
rosion.

b. If the terminal connections are loose,

tighten their clamp nuts—but do not
overtighten.

c. Tighten the hold

−

down clamp only

enough to keep the battery firmly in

place. Overtightening may damage the

battery case.

Checking battery condition—

—Precautions

—Checking battery exterior

Summary of Contents for 2004 Matrix























































































































































































































































































































Search results

Summary of Contents for 2004 Matrix

Reviews:

Related manuals for 2004 Matrix

Brands by name

Popular brands

Toyota 2004 Matrix, Owner'S Manual

Search results

Summary of Contents for 2004 Matrix

Reviews:

Related manuals for 2004 Matrix

Brands by name

Popular brands