Toyota 2004 Matrix Owner'S Manual Download Page 27

Page: 27 / 310

’04 MATRIX_U (L/O 0307)

2004 MATRIX from Oct. ’03 Prod. (OM12861U)

When the interior light dial is in the door

position, and all the side doors and back

door are unlocked simultaneously with a
key or wireless remote control transmitter,

the interior lights come on for about 15

seconds and then fade out, even if the
door is not opened. (For further informa-

tion, see “Interior/instrument panel light

control” on page 81 in Section 1

−

5.)

LOCKING AND UNLOCKING WITH

INSIDE LOCK KNOB
Move the lock knob.

To lock: Push the knob forward.
To unlock: Pull the knob backward.
The front doors can be opened by pulling
the inside handle even if the lock knobs

are in the locked position.

CAUTION

Do not pull the inside handle of the
front doors while driving. The doors

will open and an accident may occur.

Toyota strongly recommends that all
children be placed in the rear seat of

the vehicle.

Closing the door with the lock knob in the

lock position will also lock the door. Be
careful not to lock your keys in the ve-

hicle.
Vehicles with power door lock system—

Doors cannot be locked when either front

door is open and the key is in the igni-
tion.

Summary of Contents for 2004 Matrix























































































































































































































































































































Search results

Summary of Contents for 2004 Matrix

Reviews:

Related manuals for 2004 Matrix

Brands by name

Popular brands

Toyota 2004 Matrix, Owner'S Manual

Search results

Summary of Contents for 2004 Matrix

Reviews:

Related manuals for 2004 Matrix

Brands by name

Popular brands