Toyota 2004 Matrix Owner'S Manual Download Page 91

Page: 91 / 310

’04 MATRIX_U (L/O 0307)

2004 MATRIX from Oct. ’03 Prod. (OM12861U)

CAUTION

Do not adjust the mirror while the
vehicle is moving. Doing so may

cause the driver to mishandle the ve-

hicle and an accident may occur re-
sulting in death or serious injuries.

To adjust the rear view mirror, simply

operate the control lever.

NOTICE

If ice should jam the mirror, do not
operate the control or scrape the mir-

ror face. Use a spray de

−

icer to free

the mirror.

To adjust a mirror, use the switches.

1. Master switch—To select the mirror to

be adjusted

Push the switch to “L” (left) or “R”
(right).

2. Control switch—To move the mirror

Push the switch in the desired direc-
tion.

Mirrors can be adjusted when the key is
in the “ACC” or “ON” position.

—Rear view mirror remote

control

—Power rear view mirror

control

Summary of Contents for 2004 Matrix























































































































































































































































































































Search results

Summary of Contents for 2004 Matrix

Reviews:

Related manuals for 2004 Matrix

Brands by name

Popular brands

Toyota 2004 Matrix, Owner'S Manual

Search results

Summary of Contents for 2004 Matrix

Reviews:

Related manuals for 2004 Matrix

Brands by name

Popular brands