background image

Installing Virtuo

Setting up TouchTunes Wireless Broadband

Virtuo Installation and Setup Guide

59

Setting up TouchTunes Wireless Broadband

TouchTunes Wireless Broadband enables operators to connect their jukeboxes to the Internet using a 
high-speed wireless connection where a wired Internet connection would be impractical.

All Virtuo jukeboxes require a high-speed Internet connection, and when equipped with high-speed Internet access, 

TouchTunes Gen 3 jukeboxes offer many features and advantages over Gen 3 jukeboxes with dial-up connections.

A high speed Internet connection provides Gen 3 jukeboxes with:

real-time customer access to the entire TouchTunes catalog through TuneCentral

customer access to 

my

TouchTunes from jukeboxes and access to personalized playlists

faster data transfers and communications with the Operator Dashboard, including music downloads, settings 

modifications and Network Diagnostic System (NDS)

improved song recommendation quality

expanded advertisement capabilities

credit card reader functionality

The TouchTunes Wireless Broadband hardware kit (TouchTunes p/n: 600186-001) contains everything you’ll need 
to provide your Virtuo with a wireless broadband Internet connection, which will allow all the features listed above. 
This kit comes with its own Installation Guide (TouchTunes p/n: 900761-001) that will guide you through the proper 
steps for setting up a wireless broadband connection. This manual can be found on the TouchTunes Product & 
Warranty site, at 

http://productwarranty.touchtunes.com

.

Summary of Contents for Virtuo 700259-001

























































































































Reviews:

Related manuals for Virtuo 700259-001