Toshiba WT110 User Manual Download

Page: 78 / 92

User’s Manual

Wireless information

Wireless LAN Interoperability

The Wireless LAN is compatible with other LAN systems Direct Sequence

Spread Spectrum (DSSS) /Orthogonal Frequency Division Multiplexing

(OFDM) radio technology, and is compliant to:

■

The IEEE 802.11 Standard on Wireless LANs (Revision a/b/g/n or

b/g/n), as defined and approved by the Institute of Electrical and

Electronics Engineers.

■

The Wireless Fidelity (

Wi-Fi

) certification as defined by the

Wi-Fi

Alliance

The “

Wi-Fi CERTIFIED

™” logo is a certification mark of the

Wi-Fi

Alliance

Bluetooth wireless technology Interoperability

Bluetooth™ Cards from TOSHIBA are designed to be interoperable with

any product with Bluetooth wireless technology that is based on Frequency

Hopping Spread Spectrum (FHSS) radio technology, and is compliant to:

■

Bluetooth Specification Ver. 3.0+HS or Ver. 3.0 (depending on the

model you purchased), as defined and approved by the Bluetooth

Special Interest Group.

■

Logo certification with Bluetooth wireless technology as defined by the

Bluetooth Special interest Group.

Summary of Contents for WT110





























































































Search results

Summary of Contents for WT110

Reviews:

Related manuals for WT110

Brands by name

Popular brands

Toshiba WT110, User Manual

Search results

Summary of Contents for WT110

Reviews:

Related manuals for WT110

Brands by name

Popular brands