User’s Manual
7
Getting Started & Grand Tour
1. Connect the power cord to the AC adaptor.
2. Connect the AC adaptor’s DC output plug to the DC IN 19V jack on the
button of the device.
3. Plug the power cord into a live wall outlet - the
Power
indicator on the
display panel of the device should glow.
Turning on the power
This section describes how to turn on the power - the
Power
indicator will
then indicate the status.
Press and hold the computer's power button for two or three seconds.
(Sample Illustration) Turn on the device
■
When you connect the AC adaptor to the device, always follow the
steps in the exact order as described in the User’s Manual. Connecting
the power cable to a live electrical outlet should be the last step
otherwise the adaptor DC output plug could hold an electrical charge
and cause an electrical shock or minor bodily injury when touched. As
a general safety precaution, avoid touching any metal parts.
■
Never place your device or AC adaptor on a wooden surface, furniture,
or any other surface that could be marred by exposure to heat since
the device base and AC adaptor's surface increase in temperature
during normal use.
■
Always place your device or AC adaptor on a flat and hard surface that
is resistant to heat damage.
2 PIN
3 PIN
