Toshiba WT110 User Manual Download

Page: 52 / 92

User’s Manual

Hardware & Options Operation

Replacing the Battery Pack

Please be aware that the battery pack is classified as a consumable item.

The operating life of the battery pack will gradually reduce through

repeated charging and discharging, and will need to be replaced when it

reaches the end of its operating life. In addition to this, you might also

replace a discharged battery pack with a charged spare when you are

operating your device away from an AC power source for an extended

period of time.
This section explains how to remove and install the battery pack, and

begins with the removal process which is detailed through the following

steps.

Removing the battery pack

To remove a discharged battery, follow the steps as detailed below:
1. Save your work.
2. Turn the device's power off.
3. Remove all cables and peripherals that are connected to the device.
4. Turn the device upside down.

5. Slide the cover lock into its unlock (

) position.

6. Slide your finger under the cover recess and lift this corner up first.

(Sample Illustration) Removing the cover-1

Do not touch the battery release latch while holding the device or the

battery pack might fall out due to the unintentional release of the battery

release latch and cause injuries.

1. Cover lock

2. Cover recess

Summary of Contents for WT110





























































































Search results

Summary of Contents for WT110

Reviews:

Related manuals for WT110

Brands by name

Popular brands

Toshiba WT110, User Manual

Search results

Summary of Contents for WT110

Reviews:

Related manuals for WT110

Brands by name

Popular brands