Toshiba WT110 User Manual Download

Page: 49 / 92

User’s Manual

Hardware & Options Operation

CAUTION

Bluetooth™ and Wireless LAN devices operate within the same radio

frequency range and may interfere with one another. If you use Bluetooth™

and Wireless LAN devices simultaneously, you may occasionally

experience a less than optimal network performance or even lose your

network connection.
If you should experience any such problem, immediately turn off either one

of your Bluetooth™ or Wireless LAN.
Please visit the following website:

In Europe visit http://www.toshiba-europe.com/computers/tnt/bluetooth.htm

In the United States visit http://www.pc.support.global.toshiba.com

Battery

This section explains battery types, use, recharging methods and handling.

Battery pack

This section explains battery pack use, recharging methods and handling.
When the AC adaptor is not connected, the device's main power source is

a removable lithium ion battery pack. You can purchase additional battery

packs for extended use of the device away from an AC power source

although you should not change the battery pack while the AC adaptor is

connected.
Before you remove the battery pack, save your data and shut down the

device.

Real Time Clock (RTC) battery

The Real Time Clock (RTC) battery provides power for the internal real

time clock and calendar function and also maintains the system

configuration while the computer is turned off. If the RTC battery becomes

completely discharged, the system will lose this information and the real

time clock and calendar will stop working.
You can change the Real Time Clock settings in the Date and Time screen

of Windows. To access it, tap

Start

→

Control Panel

→

Clock, Language

and Region

→

Date and Time

Care and use of the battery pack

This section provides the important safety precautions in order to handle

your battery pack properly.
Refer to the enclosed

Instruction

Manual for Safety and Comfort

for

detailed precautions and handling instructions.

Some models are equipped with a 3G module.

FCC compliance and Industry Canada (IC) compliance does not apply to

this product with a 3G module installed.

Summary of Contents for WT110





























































































Search results

Summary of Contents for WT110

Reviews:

Related manuals for WT110

Brands by name

Popular brands

Toshiba WT110, User Manual

Search results

Summary of Contents for WT110

Reviews:

Related manuals for WT110

Brands by name

Popular brands