Toshiba WT110 User Manual Download

Page: 60 / 92

User’s Manual

Hardware & Options Operation

TOSHIBA Tablet Dock

Your device can accommodate some kinds of docks providing extra ports

and network-attached storage (NAS) function, so that you can charge the

battery.

Using the TOSHIBA Tablet Dock

Connecting the AC adaptor

1. Connect the power cord to the AC adaptor.

(Sample Illustration) Connecting the power cord to the AC adaptor (2-pin plug)

Please connect or disconnect an HDMI device to or from the computer

under the following conditions:

■

The computer is turned on.

■

The computer is completely turned off.

Do not do so when the computer is in Sleep Mode or Hibernation Mode.

■

When you connect a television or external monitor to the HDMI port,

the display output device is set to HDMI.

■

When you unplug the HDMI cable and re-plug it, please wait at least 5

seconds before you re-plug the HDMI cable again.

Dock Type

Feature

TOSHIBA Tablet NAS

Dock

■

Power supply and battery charge

■

Built in speaker

■

Extra ports

■

NAS function

TOSHIBA Tablet USB

Cradle

■

Power supply and battery charge

■

Extra ports

TOSHIBA Tablet Cradle

■

Power supply and battery charge

Summary of Contents for WT110





























































































Search results

Summary of Contents for WT110

Reviews:

Related manuals for WT110

Brands by name

Popular brands

Toshiba WT110, User Manual

Search results

Summary of Contents for WT110

Reviews:

Related manuals for WT110

Brands by name

Popular brands