Toshiba WT110 User Manual Download

Page: 61 / 92

User’s Manual

Hardware & Options Operation

(Sample Illustration) Connecting the power cord to the AC adaptor (3-pin plug)

2. Connect the AC adaptor’s DC output plug to the DC IN 19V jack on the

back of the dock.

3. Plug the power cord into a live wall outlet.

Connecting the TOSHIBA Tablet NAS Dock

1. Turn on the TOSHIBA Tablet.
2. Align the docking interface on the left side of your device with the

docking connector on the dock.

Either a 2-pin or 3-pin adaptor/cord will be included with the computer

depending on the model.

The AC adaptor is only equipped with TOSHIBA Tablet NAS Dock.

■

You must connect the AC adaptor before you connect to the dock.

■

When the dock is connected to your device, you can not use the follow-

ing ports on your device: DC IN 19V jack and HDMI out port.

Summary of Contents for WT110





























































































Search results

Summary of Contents for WT110

Reviews:

Related manuals for WT110

Brands by name

Popular brands

Toshiba WT110, User Manual

Search results

Summary of Contents for WT110

Reviews:

Related manuals for WT110

Brands by name

Popular brands