Toshiba WT110 User Manual Download

Page: 91 / 92

User’s Manual

Regulatory information

Medical environment: The compliance to the Medical Product Directive has

not been verified by Toshiba, therefore this product cannot be used as a

medical product without further verification. The use in usual office

environments e.g. in hospitals should be no problem if there is no restriction

by the responsible administration.
Automotive environment: Please search the owner instructions of the

related vehicle for advices regarding the use of this product (category).
Aviation environment: Please follow the instructions of the flight personnel

regarding restrictions of use.

Additional environments not related to EMC

Outdoor use: As a typical home/office equipment this product has no

special resistance against ingress of moisture and is not strong shock

proofed.
Explosive atmosphere: The use of this product in such special working

environment (Ex) is not allowed.

REACH - Compliance Statement

The new European Union (EU) chemical regulation, REACH (Registration,

Evaluation, Authorization and Restriction of Chemicals), entered into force

on 1 June 2007. Toshiba will meet all REACH requirements and is

committed to provide our customers with information about the chemical

substances in our products according to REACH regulation.
Please consult the following website www.toshiba-

europe.com/computers/info/reach for information about the presence in our

articles of substances included on the candidate list according to article

59(1) of Regulation (EC) No 1907/2006 („REACH“) in a concentration

above 0.1 % weight by weight.

Following information is only valid for EU-member States:

Disposal of products

The crossed out wheeled dust bin symbol indicates that products must be

collected and disposed of separately from household waste. Integrated

batteries and accumulators can be disposed of with the product. They will

be separated at the recycling centres.

The black bar indicates that the product was placed on the market after

August 13, 2005.

By participating in separate collection of products and batteries, you will

help to assure the proper disposal of products and batteries and thus help

to prevent potential negative consequences for the environment and

human health.

For more detailed information about the collection and recycling

programmes available in your country, please visit our website

(http://eu.computers.toshiba-europe.com) or contact your local city office or

the shop where you purchased the product.

Summary of Contents for WT110





























































































Search results

Summary of Contents for WT110

Reviews:

Related manuals for WT110

Brands by name

Popular brands

Toshiba WT110, User Manual

Search results

Summary of Contents for WT110

Reviews:

Related manuals for WT110

Brands by name

Popular brands