Toshiba WT110 User Manual Download

Page: 19 / 92

User’s Manual

Getting Started & Grand Tour

Power conditions

The device's operating capability and battery charge status are affected by

different power conditions, including whether an AC adaptor is connected,

whether a battery pack is installed and what the charge level is for that

battery.

The LED in the table below refers to the

Battery

indicator.

Power on

Power off
(no operation)

adaptor

not

connected

Battery fully

charged

  • Operate
  • No charge
  • White

• No charge
• LED: Off

Battery partially

charged or no

charge

  • Operate
  • Charge
  • Amber

  • Operate
  • Quick charge
  • LED: Off

No battery

installed

• LED: Off

adaptor

connected

Battery fully

charged

• Operate
• LED: Off

Battery partially

charged or no

charge

• Operate
• LED: Amber

No battery

installed

• No operation
• LED: Off

Summary of Contents for WT110





























































































Search results

Summary of Contents for WT110

Reviews:

Related manuals for WT110

Brands by name

Popular brands

Toshiba WT110, User Manual

Search results

Summary of Contents for WT110

Reviews:

Related manuals for WT110

Brands by name

Popular brands