Toshiba SpectraLink 6000 System User Manual Download Page 72

Page: 72 / 281

Connecting Other External Devices

Inserting and removing hard drives

Turn the computer upside down.

Remove the screw on the hard drive bay cover.

Removing the hard drive cover screw

Lift the hard drive bay cover to expose the hard drive.

Grasp the plastic tab on the exposed edge of the hard drive
and pull it to remove the hard drive from the computer.

Removing the hard drive from the computer

Install the new hard drive by sliding it into the hard drive bay
and pressing it firmly until it locks. Do not force the drive into
the computer.

Summary of Contents for SpectraLink 6000 System


























































































































































































































































































Search results

Summary of Contents for SpectraLink 6000 System

Reviews:

Related manuals for SpectraLink 6000 System

Brands by name

Popular brands

Toshiba SpectraLink 6000 System, User Manual

Search results

Summary of Contents for SpectraLink 6000 System

Reviews:

Related manuals for SpectraLink 6000 System

Brands by name

Popular brands