Toshiba SpectraLink 6000 System User Manual Download Page 68

Page: 68 / 281

Connecting Other External Devices

Adding memory

Inserting the memory module into the slot

Replace the cover plate and the screws.

Turn the computer over and restart it.

When you turn on the computer, it automatically recognizes
the additional memory.

Removing a memory module

If you need to remove a memory module:

Complete steps 1–6 in “Installing a memory module” to shut
down the computer and open the memory module cover.

Pull the clips away from the memory module.

The memory module pops partially out of the slot.

Summary of Contents for SpectraLink 6000 System


























































































































































































































































































Search results

Summary of Contents for SpectraLink 6000 System

Reviews:

Related manuals for SpectraLink 6000 System

Brands by name

Popular brands

Toshiba SpectraLink 6000 System, User Manual

Search results

Summary of Contents for SpectraLink 6000 System

Reviews:

Related manuals for SpectraLink 6000 System

Brands by name

Popular brands